9-5 (9600) L4-2.3L Turbo (2007)
21. Remove the plug from the cap for the power steering fluid reservoir. 22. Fill with 93 160 548 Power steering fluid, and bleed the power steering
system in accordance with WIS - Steering assembly - Power steering system - Adjustment/Replacement.
23. Check that there is no remaining leakage of power steering fluid.
Marking the modification identity plate (not US/CA)
After carrying out the procedure, box B1 on the modification identity plate must be marked. From and including M04 the car's Warranty and Service
Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8"
if carried out by the dealer.
Fitting the modification identity plate (not US/CA)
NOTE: A modification identity plate must only be fitted where local directives require the marking of the car.
Fit the modification identity plate in accordance with WIS 9-5 M04 - General - General - Technical data - Plates and labels