9-5 (9600) L4-2.3L Turbo (2.3 T) (2006)
Note: The rubber mountings can be lubricated with acid-free petroleum jelly to facilitate fitting.
1. Fit the rubber mountings, lift up the exhaust system and fit it in place. Adjust the system so that it does not break/buckle or lie against anything.
For cars with visible tailpipe: adjust so that the tailpipe is centred in the cut-out.
2. Fit the rubber mounting lock clips.
3. Fit the nuts at the joint between the front and rear of the exhaust system.
Tightening torque: 22 Nm (16 ft. lbs.)