saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

LED (Light Emitting Diode)|Page 7380 > < LED (Light Emitting Diode)|Page 7378
Page 2
background image

Function

The LED is powered by +30 from fuse 9 (22a) and is grounded via pin 27 on TWICE. TWICE controls the ground connection and therefore also the
activation of the LED and its flash frequency.

Self diagnosis

Whenever the alarm is armed, a self-diagnosis is carried out during the delay time (10 seconds) while the LED is lit continuously. If a fault is found, a
diagnostic trouble code is stored in the control module and the LED does not flash. The other functions of the alarm are not affected.

LED (Light Emitting Diode)|Page 7380 > < LED (Light Emitting Diode)|Page 7378