9-5 (9600) L4-2.3L Turbo (B235) (2001)
Shock Sensor: Service and Repair
Glass Breakage Sensor (4D)
To remove
1. Remove the lens cover from the centre ceiling lamp by pulling it downward.
2. Remove the switch panel on the ceiling lamp by releasing the belt tongues on the LH and RH sides with a small screwdriver.
3. Detach the connector for the sensor. Remove the sensor from the lens cover.
To fit
Fit in reverse order.
IMPORTANT
In order to obtain the correct function and sensitivity of the anti-theft alarm, it is essential the correct variant of glass breakage sensor is used. There are
two types of sensor: one for cars with fabric seat covers and one for cars with leather seats.