9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-2466001.png)
Rear Bumper Reinforcement: Service and Repair
Replacement of Rear Cellular Block, 4D
Replacement Of Rear Cellular Block, 4D
To remove
1. Remove the bumper and lay it on a well-protected workbench.
2. Loosen the upper cellular block from the protective shell. Lift it out from the bumper rail (it is wedged into the bumper rail).
3. Remove the two cellular blocks that sit on each side of the protective shell. Loosen the bumper rail from the 14 clips securing it to the protective
shell.
