saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Headlining, 4D|Page 8789 > < Headlining, 4D|Page 8787
Page 3
background image

7. Remove the B-pillar trim on the passenger side (fastened with clips).

Lift the trim out of the air duct and place to one side.

8. Detach the top of the C-pillar trim (fastened with clips).
9. Remove the cover for the high level brake light (fastened with clips) and unplug the connector.

Pull the brake light lead clear of the console.

10. Undo the 2 clips securing the back of the headlining by turning them 90°.
11. Lower and slide back the front seats and fold down the backrests as far as possible.
12. Carefully pull the headlining out of the door sealing moulding on the passenger side. Then pull the headlining out of the door sealing moulding on

the driver's side.

13. Cars with sunroof:

Detach the headlining from the hooks by the sunroof.

14. Unplug the connector on the top of the headlining.

If necessary, unplug the connector for the alarm system.

NOTE:  Move the steering wheel forward and select reverse for manual cars or 1st for automatics.

IMPORTANT
Be careful not to crack the headlining

15. Lift the headlining out through the front door on the passenger side.

When replacing the headlining, the rear roof light and wiring harness should be removed.

To fit

IMPORTANT

Be careful not to crack the headlining.

Headlining, 4D|Page 8789 > < Headlining, 4D|Page 8787