9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-2580001.png)
Scuff Plate: Procedures
Recreating Surface Structure On Bumpers, Spoilers And Scuff Plates
This procedure allows you to recreate the structure of visible unpainted surfaces after welding and sanding. This method can also be used to repair light
and very superficial scratches
NOTE:
-
Always use a gravity feed spray gun with the recommended nozzle (1.8 - 2.4 mm).
-
HVLP sprays also provide good results.
1. Sand the damaged area with abrasive paper (grade 400 - 500).
