9-5 (9600) L4-2.3L Turbo (B235) (2001)
3. Fit and tighten the coolant pipe to the coolant pump and by the turbo.
Tightening torques:
Banjo bolt, turbo: 25 Nm (18.4 ft. lbs.)
Banjo bolt, coolant pump: 20 Nm (14.7 ft. lbs.)
4. Fit the two longitudinal coolant pipes to the coolant pump.
Tightening torque: 10 Nm (7.4 ft. lbs.).
5. Fit the two longitudinal coolant pipes to the engine block.
6. Fit the hose clips and hoses to the coolant pump inlet.
7. Fit the power steering pump.
Tightening torque: 24 Nm (17.7 ft. lbs.).
8. Extract the plug from the turbo inlet and then fit the intake pipe.
Tightening torques:
V-clamp 3 Nm (2 ft. lbs.)
9. Reconnect the vent hose.
10. Fit the exhaust manifold heat shield.
Tightening torque: 20 Nm (15 ft. lbs.)