9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-660001.png)
Valve: Service and Repair
Fitting the Valve Gear
Fitting The Valve Gear
Important: Defective valve stem seals must be replaced. The sealing surfaces and bearings must be lubricated with oil before the valves are fitted.
Make sure that the cylinder head rests on blocks to prevent damage to the valves (bent valve stems) when the camshafts are tightened down.
1. Fit the washer with valve stem seal using Tong For Removing Valve Guide Seal 83 94 157.
2. Fit the valves and springs.
3. Use Valve Spring Compressor 83 93 761 and Valve Spring Depressor 83 93 779 to refit the collets.
