9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-679008.png)
12. Tighten the other exhaust pipe nuts.
Tightening torque: 25 Nm (18 ft. lbs.)
13. Connect the heated oxygen sensor cables.
14. Fit the heat shield over the exhaust manifold and the turbo bypass pipe.
15. Add the engine oil and replace the dipstick.
16. Replace the upper engine cover.
17. Run the engine to normal temperature and check the mating surfaces.
18. Replace the bottom engine cover.
19. Lower the car, check the oil level and add oil if necessary.
