9-5 (9600) L4-2.3L Turbo (B235) (2001)
9. Remove the multigroove V-belt from the compressor.
10. Remove the driver using a 10 mm spanner and a suitable support. Pull it out from the shaft.
11. Remove the circlip holding the belt pulley and lift it off.
NOTE: If the electronic clutch sticks, tap it with a plastic hammer until it becomes loose.
12. Remove the circlip holding the solenoid winding and lift it off.
NOTE: If the solenoid winding sticks, carefully bend with a screwdriver so that the guide pin releases from the groove
To fit