9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-498004.png)
1. Use a 4-column lift to raise the car so that the wheels are under pressure.
2. Fasten the longitudinal links with Fixture 89 96 795
3. Slightly undo the bolts to the body bracket of one of the longitudinal links.
4. Using Sleeve 89 96 811, move the bracket outwards or inwards. Move it inwards to increase toe-in.
Check the value.
5. Tighten the bolts.
Tightening torque 90 Nm (70 ft. lbs.) + 30°.
6. Repeat steps 3-5 on the other side.
7. Treat the body with corrosion protection.
8. Proceed with Adjusting front toe angle.
Adjusting front toe angle
1. Start with Adjusting rear toe angle if not already done.
