9-5 (9600) L4-2.3L Turbo (B235) (2001)
/l4-2.3l_turbo_(b235)/Page-1134002.png)
3. Place the end of the hose in a receptacle/measuring flask.
4. Plug in the injectors to Their respective connectors.
5. Start the fuel pump by connecting the multilead connector (part no.83 93 886) between fuse 8 upper pin and fuse 19 lower pin.
6. Carry out the flow capacity check using the diagnostic tool. This tool will activate the injector by supplying it with battery voltage for exactly 30
seconds.
7. Check the amount of fuel in the receptacle according to the table below.
8. Change any defective injectors.
9. Fit the fuel rail with injectors.
