9-5 (9600) L4-2.3L Turbo (B235) (2001)
Evaporative Shut Valve: Service and Repair
EVAP Shut-Off Control Valve
EVAP Shut-off Control Valve
To Remove
1. Raise the car.
2. Cut the cable tie.
3. Unplug and detach the connector to the vent device.
4. Detach the vent device from the filler pipe bracket with a screwdriver.
5. Clean the vent device.
6. Remove the top cover over the shut-off valve.
7. Detach the connector from the shut-off valve and remove the washer.
8. Move the cover along the hose to access the hose clip.
9. Remove the valve by undoing the valve hose connection.
To fit