saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Resetting Triggered Limp-Home Solenoid|Page 3875 > < Resetting Triggered Limp-Home Solenoid|Page 3873
Page 1
background image

Limp Home Throttle Valve: Service and Repair
Limp-Home Solenoid

  

Limp-home solenoid

To remove

1. Remove the engine cover.
2. Remove the cover on the throttle body pedal arm.
3. Undo the lower bolt (it may be difficult to reach), using a magnetic T15 bit.
4. Remove the rubber seal and unplug the connector.
5. Remove the upper screw.
6. Remove the solenoid. (Not available as a separate spare part)

To fit

1. Fit the solenoid.

Resetting Triggered Limp-Home Solenoid|Page 3875 > < Resetting Triggered Limp-Home Solenoid|Page 3873