9-5 (9600) L4-2.3L Turbo (B235) (2001)
Power Seat Control Module: Testing and Inspection
Test Readings, Control Module Connections
The following are the instructions and values for measuring the control module.
Remember:
-
Observe the test conditions. Use common sense when evaluating test results.
-
Unless otherwise stated, the test readings presented are with the ignition switch in the ON position.
-
Check the following points:
-
First check that the control module is supplied with current and grounded.
-
Then check all sensor inputs and signals from other systems.
-
Check the control module outputs last. Remember that the test readings do not indicate whether or not the actuator is working.
-
If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components which ought to be checked more thoroughly.
-
The test readings given apply to a correctly calibrated Fluke 88/97.
-
The test readings show the pulse ratio and pulse duration of the signal. A test instrument capable of measuring both pulse ratio and pulse duration
must be used.