9-5 (9600) L4-2.3L Turbo (B235) (2001)
6. Fit the module and its two screws. Make sure the strip does not poke out of the edges. Fit the plugs in the screw holes.
7. Start the engine and check that the airbag lamp does not indicate a fault.
-
If the lamp indicates a fault, the airbag system performs a fault diagnosis.
8. Check the signal function.
Passenger Side Replacement
WARNING Read through Technical description carefully before starting work.
Removal
1. Ignition switch in the OFF position.
2. Remove the dashboard.