9-5 (9600) L4-2.3L Turbo (B235) (2001)
6. Insert locking pin 87 92 335 into the gear-lever housing.
7. Tighten the nut on the clamp securing the selector rod to the linkage on the gearbox
Tightening torque: 22 Nm (16 ft. lbs.).
8. Remove the locking pin from the gearbox and insert the plastic plug.
9. Remove the locking pin from the gear lever housing and refit the gaiter.
10. Check that all gears can be engaged and that the key can be removed in reverse.