9-5 (9600) L4-2.3L Turbo (B235) (2001)
Shifter M/T: Service and Repair
Changing Bushes In the Gear Lever Joint
Change bushes when there is play in the joint.
1. Remove the selector rod.
2. Tap out the spacer sleeve using a drift.
3. Remove and change bushes.
4. Fit the spacer sleeve.
5. Fit the selector rod.
Reverse Gear Detent
To Remove
1. Lift the gear lever gaiter.
2. Put the gear lever in neutral.
3. Carefully press in the three catches in the ball socket using a screwdriver and lift the gear lever far enough to expose the reverse gear detent catch.
4. Unhook the reverse gear detent from the ball socket.
To Fit