9-5 (9600) L4-2.3L Turbo (B235) (2001)
9. Fit the complete gear lever housing and selector rod.
Gear Lever Housing
To Remove
1. Remove the center console.
2. Engage 4th gear and secure 4th in the gearbox with locking pin 87 92 336
3. Undo the pinch-bolt clamp to the selector rod universal joint.
4. Remove the bolts securing the gear-lever housing.
5. Lift the gear-lever housing and unplug the electrical connection to the ignition switch.
6. Lift out the gear-lever housing.
To Fit
1. Insert the end of the selector rod through the rubber gaiter. Put the gear-lever housing in place in the car.