9-5 (9600) L4-2.3L Turbo (B235) (2001)
5. Remove the rubber covers from the wiper stems.
6. Remove the rear bonnet seal.
7. Remove the clips holding the covering over the bulkhead partition space. Remove the covering by lifting the front edge and then pulling forward
so that the clips release from the windscreen edge. Then lift rearwards and remove it.
8. Remove the A-pillar trim and ticket holder.
9. For cars with rain sensor, see points 10-12. If the car does not have a rain sensor, continue from point 13.
10. Remove the sensor cover by inserting 82 93 474 Removal tool in the bottom edge and pulling the tool upwards. Repeat on the opposite side and
lift away the cover.