9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-2704003.png)
-
Remove component: Radio antenna amplifier
-
Clean both ground connections on the antenna amplifier, the area around the stud screws and the screws holes in the body.
-
Mount the component Radio antenna amplifier.
-
The antenna amplifier must have a good ground connection to both the stud screws.
After performing this procedure See: Poor Radio Reception/Diagnostic Procedures/4-Door/Check the Antenna Amplifier Trigger Voltage
Check the Antenna Amplifier Trigger Voltage
Check The Antenna Amplifier Trigger Voltage