9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Carry out the points in 'Before replacing a control module' and then, if necessary:
-
Change - Amplifier.
After performing this procedure See: Diagnostic Procedures/Premium/Speaker, Dashboard, Center/Final Check
Final Check
Final Check
-
Clear the diagnostic trouble codes in all systems.
-
Carry out a functionality test.
Is the function correct?
NO
-
Refer to "Before changing a control module" at Fault Diagnosis, General. See: Testing and Inspection/Fault Diagnosis, General/Before
Changing A Control Module
YES -
The steps taken to rectify the fault were correct.