9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
![background image](/saab/9-5_aero_(9600)/l4-2.3l_turbo_(b235)_ho/Page-3164012.png)
5
Fit the foam cushion reinforcing plate to the back plate and replace the upholstery strips along the edge. On the 60% backrest, replace the
upholstery strips around the load hatch.
6
Replace the hinge plates.
Replace the backrest in the car.
Rear seat backrest upholstery, 5D
To remove
1
Take the backrest out of the car.
2
Remove the plastic cover on the backrest catch, 1 screw and a bayonet clip under the handle.
3
Lift out the head restraint by pressing in the catches, one by hand and the other by pressing a small screwdriver against the small catch, while
pulling up the head restraint.
4
Loosen the clip for the head restraint sleeve with a small screwdriver while carefully prying the top with a driver so that the sleeve comes loose.
Pull up the sleeve half way, turn it half a revolution and pull it all the way out. Repeat the procedure on the remaining sleeves.
5
Remove the belt cover that is fastened with clips.