9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Seat Cover: Service and Repair
Upholstery Fabric, Seat Cushion Replacement
Upholstery fabric, seat cushion
To remove
1
Take the front seat out of the car, refer to "Front Seat Replacement". See: Service and Repair/Procedures
2
Manual front seat:
Remove the height adjustment lever and backrest adjustment knob.
Note: When removing the knob, note that the backrest rake spindle may be removed with the knob.
3
Remove the upper seat cowl, 2 covers and 3 screws. Lift the cowl at the back and pull forward.
For electrically adjustable front seats, remove the connector for the switch and any memory buttons.
4
Remove the lower seat cowl, 2 screws.
5
Remove the seatbelt mounting, 1 bolt.
6
Remove the plastic cover on each side of the backrest joint.
The plastic cover conceals the hole for access to the screws holding the seat at the rear.
7
Undo the seat cushion at the rear, 2 screws.