9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Fuel Tank Pressure Sensor: Service and Repair
WARNING
Removal of the tank pressure sensor involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection
with this work:
-
Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapor is available then make sure it is used.
-
Wear suitable gloves! Prolonged contact with fuel can cause skin irritation.
-
Keep a class BE fire extinguisher close by! Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting
leads in electrical circuits.
-
Smoking is strictly forbidden.
-
Wear protective goggles.
To remove
1
Remove the fuel tank.
2
Clean around the pressure sensor with compressed air.
3
Undo the screw on the pressure sensor.
4
Carefully remove the pressure sensor.
To fit