9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
/l4-2.3l_turbo_(b235)_ho/Page-1451003.png)
13
Remove the control rod and coat the pin on the operating arm sparingly with Molykote 1000 (part No. 30 20 271) or the equivalent.
14
Fit the control rod and clip, grip the control rod to prevent it from moving and lock the nut.
15
Remove the pressure gauge and pump.
16
Reconnect the hose to the diaphragm unit.
17
Fit the heat shield, coat its stud with Molykote 1000 (part No. 30 20 271) or the equivalent, and screw on the rut.
18
Grease the O-ring with non-acidic vaseline and fit the bypass pipe.
Tightening torque 8 Nm (5.9 lbf ft)