9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Ignition Coil Pack: Service and Repair
Ignition Discharge Module
Ignition discharge module
To remove
1
Unplug the ignition discharge module's 10-pin connector.
2
Remove the 4 screws.
3
Lift up the module.
To fit
Fit in reverse order.
Spray the connector with Kontakt 61 contact cleaner (part No. 30 21 763).
Coat the rubber seals with Krytox (part No. 30 19 312).
Tightening torque 11 Nm (8.1 lbf ft)