9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Evaporator Temperature Sensor / Switch: Service and Repair
Evaporator Temperature Sensor
To remove
1
Remove the glove box.
Remove the trim from the side of the center console.
2
Cut the cable tie holding the wire harness to the service cover. Also cut the cable tie holding the cooler hose to the glove box.
Remove the service cover.
3
Remove the fresh-air filter.
4
Put a hand into the filter holder and carefully pull out the temperature sensor from the evaporated.
5
Separate the connector and detach contact from the plate.
Lift up the plate and unplug the contact.
To fit