9-5 Aero (9600) L4-2.3L Turbo (B235) HO (2000)
Crankshaft Position Sensor: Service and Repair
Crankshaft position sensor
WARNING: Be very careful as the exhaust pipe from the turbo can become extremely hot.
To remove
1
Remove the manifold's heat shield.
2
Remove the bolt securing the heat shield and sensor.
3
Remove the sensor and O-ring.
4
Trace the sensor's connecting lead and detach the retaining clip from the water pipe.
5
Remove the connector from the holder.
6
Unplug the connector.
7
Change the sensor.
To fit
1
Prepare the sensor so that the wiring runs alongside the water pipe. Change the O-ring as necessary and smear it with motor oil.