9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
5. Lower the car slightly, remove the brake pedal clamp and put the fuse back in its holder.
6. Bleed the brake system, refer to Brake Bleeding, Service and Repair.
7. Fit the rear wheels and tighten the wheel bolts, using a torque wrench.
Tightening torque 110 Nm (81 ft. lbs.).
IMPORTANT: The wheel must hang freely when the wheel bolts are being tightened.
8. Lower the car to the floor and depress the brake pedal to force out the brake pistons.
9. Check the brake fluid level and top up as necessary.
Hydraulic Body Replacement
To Remove
1. Raise the car and remove the wheel.
2. Remove the brake pads.
3. Depress the brake pedal slightly, using a brake pedal clamp.
4. Remove fuse No. 1 for the brake lights.