9-5 Arc Sport Wagon (9600) V6-3.0L Turbo (B308) (2002)
3.
Pull out the switch pushrod and the red sleeve.
4.
Press in the locking tab on the switch using a small screwdriver and remove the switch.
5.
Remove the connector.
6.
Cut off the connector and fit new sleeves, part no. 91 20 775. Use 86 12 079 Toolbox, wiring harness.
7.
Pin the sleeves in the new connector.
Red/blue cable to position 1 and orange/white cable to position 2.
Note
Carefully pull in the cables in order to ensure that the rear protection on the sleeves has locked.