saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Bus Description General|Page 3363 > < Bus Description General
Page 1
background image

Information Bus: Description and Operation
Bus Operation By System

Speed Bus From TC/ABS

Speed, Bus From TC/ABS

The TC/ABS control module sends a bus message "Wheel speed, right front, XXX km/h" via the P-bus to the Trionic control module connection 19 and
66. This speed signal is used to:

-

prevent adaptation of idle speed control when the car is moving.

-

on manual gearboxes, determine which gear is currently being used. This makes it possible to limit torque in gears R and 1 and activate fuel
shut-off in gears 2, 3, 4 and 5. Control of the SHIFT UP lamp also depends on the current gear.

-

activate speed limitation by limiting the maximum air mass/combustion at 240 km/h.

Bus Description General|Page 3363 > < Bus Description General