9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Trunk / Liftgate Hinge: Service and Repair
Boot Lid Hinges, 4D
Boot Lid Hinges, 4D
To remove
This method describes the left-hand hinge.
1. Protect the rear wing with a cover and then place a support under the boot lid.
2. Remove the clip securing the upper gas spring mounting and remove the gas spring from its mounting.
3. Remove the two nuts on the boot lid.
4. Detach the grommet hose from the hinge.