9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
![background image](/saab/9-5_linear_(9600)/l4-2.3l_turbo_(2.3t)/Page-3279009.png)
1. Make sure the component or lead being tested is not carrying a current (e.g. by removing the associated fuse).
2. Set the multimeter to resistance measurement and connect it across the component/lead being tested.
3. Move the wiring harness in question while observing the ohmmeter.
The resistance of the wiring harness should normally be less than 1 ohm. A specified value applies to components.
Checking for short circuits to ground