9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
![background image](/saab/9-5_linear_(9600)/l4-2.3l_turbo_(2.3t)/Page-2009003.png)
3. Remove the plugs and fit the brake pipes. Tighten the brake pipe unions by hand first and then with a spanner.
Note: Start with the rear brake pipes and tighten one union before starting with the next.
Tightening torque 16 Nm (12 ft. lbs.)
4. LHD, manual gearbox: Attach the clutch fluid hose to the brake fluid reservoir.
Fit the hose clip upwards.
5. Plug in the connector.
6. Fit the electrical distribution unit.
7. V6 diesel engine: Fit the turbocharger heat shield.
8. Fit the battery and the battery cover.
9. Once the unit has been changed, the control module must be configured.
TC/ABS: Configuring TC/ABS.
ESP: Configuring ESP.
10. Bleed the brake system.
11. Test the brakes.