9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
7. Fit the wheel sensor cable to the mounting.
8. Plug in the connector to the wheel sensor.
9. Fit the mounting for the Handbrake cable.
Tightening torque: 8 Nm (6 ft. lbs.).
10. Fit the air separator.
11. Fit the wheel.
Tightening torques
aluminium rim 110 Nm (81 ft. lbs.)
pressed steel rim 50 Nm +2x90°, max. 110 Nm (37 ft. lbs. +2x90°, max. 81 ft. lbs.)
12. Lower the car to the floor.
13. Depress the brake pedal to press out the pistons in the brake calipers.