9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-2084002.png)
1. Raise the car and remove the wheels.
2. Press back the piston with a pair of slip-joint pliers.
3. Remove the clip from the brake caliper.
4. Remove the dust caps from the guide pins and then remove the guide pins.
5. Lift the brake caliper off the brake disc and suspend it from the suspension strut.
6. Remove the brake pads.
Clean the inside of the brake caliper with a soft wire brush and inspect the dust caps.
To fit
1. Fit the new brake pads in the brake caliper.
^
The outboard brake pads have acoustic wear indicators that must face downwards.
^
The inboard brake pads must be fitted with the arrows pointing in the direction of rotation of the brake disc when the car is driven in a forward
direction.
2. Fit the brake caliper, clean the guide pins and tighten them using a torque wrench.
