9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
19. Fit the oil pump driver.
20. Make sure that the marking on the oil pump gear ring is facing outward and pump impeller with flange inward. Use a new O-ring, grease with
Vaseline.
21. Oil and fit the pump gears, fit the pump cover in correct position using the locating arrows.
22. Fit the circlip with bevel facing outward and the opening downward. Fit a new crankshaft seal. Use 83 94 876 Fitting tool, crankshaft seal.
23. Fit the crankshaft pulley.
Tightening torque 175 Nm (129 ft. lbs.)
24. Fit the bolt to the intermediate shaft bearing bracket.
25. Fit the bolt to the AC compressor bracket.