9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-964003.png)
5. Check the water pump O-rings and renew as necessary.
Clean the hole in the block and tighten the sleeve, using a torque wrench, with its large wing pointing horizontally towards the flywheel end.
Lubricate O-rings with acid-free Vaseline and fit the water pump.
6. Fit the crankshaft pulley. Use flywheel locking attachment 83 94 868.
Tightening torque 175 Nm (130 ft. lbs.).
7. Check that there are no impurities or other foreign matter in the sump and clean the sealing surfaces.
8. Apply an even bead of Loctite 518 on the oil sump's sealing surface and fit the oil sump in place.
Tightening torque 22 Nm (16 ft. lbs.).
9. Fit the guard plate, plug in the oil level sensor and press the cable back into its clamps.
10. Check that the oil plug is tight and connect cables to oil pressure sensor, generator and starter motor.
Tightening torque 25 Nm (19 ft. lbs.).
