9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
![background image](/saab/9-5_linear_(9600)/l4-2.3l_turbo_(2.3t)/Page-784005.png)
15. Detach the rear end of the low-pressure pipe from the expansion valve.
Plug the openings.
16. Loosen the pipe from the holders on the structure.
17. Carefully lift out the low-pressure pipe.
To fit
1. Position the rear end of the low-pressure pipe in its correct location.
Adjust the oil level in the compressor.
2. Remove the plugs and lubricate the O-rings on the low-pressure pipe.
3. Connect the low-pressure pipe to the expansion valve.
Tightening torque: 7 Nm (5 lbf ft)
4. Fit the power-steering oil container.
5. Fasten the pipe with the holders on the structure.