9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
voltage to the lamps.
If the Night Panel function of SID has been selected, the bulbs in the button and control lighting will shine with reduced strength.
Acoustic warning
Acoustic warning if the driver's door is opened while the key is still in the ignition.
Acoustic warning if the parking lights are on and the driver's door is opened while the key is not in the ignition.
The function is programmable.
Windscreen and rear window wiping, intermittent
When using the intermittent function on the windscreen wipers, the time between the strokes can be varied from 2 to 15 seconds and is adjusted using a
potentiometer located on the control lever of the wiper switch.
DICE also controls the wiper function for windscreen and rear window washing (5D). For a short wash, the wiper arms swipe three times. For a longer
wash, the wiper strokes increase to a maximum of five strokes. The rear window wiper swipes a few strokes after a slight delay when washing.
The "extra wiper stroke" function after washing is programmable.
High-pressure cleaning, headlamp
DICE activates the relay for headlamp washing.The maximum wash time for the headlamps is 150 seconds when washing the windscreen.
Electrically heated rear window and door mirrors
Electric heating of the rear window and exterior rear-view mirrors. These functions are activated manually or automatically via the car's ACC function,
alternatively manually when the car has MCC.
Radiator and battery fans
DICE controls when the radiator fan is switched on and off. Depending on the market, the car is equipped with either 1 or 2 radiator fans and 1 battery
fan. The battery fan starts when the car's radiator fan starts at low speed.
On cars without A/C, one fan. DICE switches the radiator fan on/off.
On cars with A/C, 2 fans. DICE controls whether one or two fans will be used.
DICE uses the following information to control the function:
^
Coolant temperature
^
A/C pressure
^
Outside temperature
^
Vehicle speed
Air conditioning
Control of the A/C function. DICE uses the following values to determine whether the A/C compressor should be allowed to operate:
^
Coolant temperature
^
A/C system working pressure
^
Evaporator temperature (up to VIN 33017341)
^
Outside temperature
^
Vehicle speed
^
Time that the engine has been running
If DICE gives approval for the A/C compressor to operate, DICE sends a bus message that is used by the engine control system to activate the
compressor clutch relay.
P-bus and I-bus