9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
/l4-2.3l_turbo_(2.3t)/Page-1556001.png)
Fuel Rail: Service and Repair
Fuel Rail With Injectors, 4-cyl. (B235E/R)
WARNING: Removal of the fuel rail involves partial dismantling of the car's fuel system. The following points must therefore be observed in
connection with this work:
^
Make sure a class BE fire extinguisher is close to hand. Consider the risk of sparking, e.g. when breaking circuits, short-circuits etc.
^
Absolutely No Smoking.
^
Ensure that there is a good exchange of air. If approved ventilation for the extraction of fuel fumes is available, this should be used.
^
Wear protective gloves. Prolonged exposure of the hands to fuel can cause irritation to the skin.
^
Wear protective goggles.
To remove
IMPORTANT: Great cleanliness must be observed when working on the fuel rail and injectors. Clean the injectors, fuel-injection rail and intake
manifold. Blow clean with compressed air.
1. Remove the upper engine cover.
2. Remove fuse 19 with the engine running. Turn the ignition key to OFF when the engine has stopped.
3. Undo the hoses for the crankcase ventilation.
