9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
7. Check that the wings are parallel.
8. Fit the retaining clip with the new screw. Insert the screw manually to avoid damaging the thread. Check that the retaining clip does not press
against the yellow catches.
Tightening torque 2 Nm (1.5 lbf ft)
9. Fit the cover and reposition the carpet flap.
10. Reposition the left seat cushion and close the left rear door.
Marking the modification identity plate (not US/CA)
After completing the work, mark the relevant box of the modification identity plate (see the table below). Mark the box with a "7" if the procedure was
carried out by the importer or an "8" if done by a dealer.