9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Diagnostics
Three different diagnostic trouble codes can be generated if the mass air flow sensor develops a fault:
^
If the mass air flow sensor does not send a frequency at all to the control module, diagnostic trouble code P0100 will be generated. This can be
due to a break in one of the leads.
^
If the frequency is too low, diagnostic trouble code P0102 will be generated. This can be due to a major leak between the mass air flow sensor and
the throttle body or and internal fault in the mass air flow sensor.
^
If the frequency is too high, diagnostic trouble code P0103 will be generated. This can be due to and internal fault in the mass air flow sensor.
System reaction to a fault
^
As soon as the control module detects a fault, the intake pressure and intake air temperature will be used as substitute values while the car is being
driven.
Fuel adaptation is zeroed.