9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
6. Refit the fluid filler pipe.
Tightening torque 22 Nm (16 ft. lbs.)
7. Fit the selector lever cable lever. Before tightening the nut, move the selector lever to position P (to relieve the tension in the wire).
Tightening torque 20 Nm (15 ft. lbs.)
8. Fit the battery tray, battery and MAXI fuse board.
9. Fit the battery cover.
10. Check that the engine starts when the selector lever is in positions P and N. The engine must not start in positions R, M, and L. The reversing light
shall only be illuminated in position R.
11. Set the right time on the clock.
IMPORTANT: On cars with a shift-lock function, incorrect adjustment of the gear selector position sensor could result in disablement of this
function (SHIFT-LOCK).