9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
System Relay: Description and Operation
A/C Relay
Diagram
When the A/C compressor is activated from the ACC or MCC and all other condition have been fulfilled, DICE will send bus information "A/C ON".
The value is used by Trionic T7.
The control module then calculates the impending torque requirement of the compressor based on the A/C pressure and subsequently requests a
corresponding increase in the air mass/combustion. After a short delay, the control module will ground pin 4, which is connected to the A/C relay.
The control module activates the relay only after the engine has started.