9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Air Bag Control Module: Service and Repair
SRS Control Module
WARNING: Read the Safety and handling directions and Before changing a control module before starting work.
To remove
1. Ignition switch in the OFF position.
2. Remove the centre console.
3. Unplug the control module.
4. Remove the nuts securing the control module.
To fit
The mounting of the control module is directionally dependent. The Supplementary Restraint System (SRS) will not work if the control module is fitted
incorrectly.
After changing the control module, it must be programmed for correct operation. The diagnostic tool Programming function is used to carry out the