9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Wheel Speed Sensor: Description and Operation
ABS With TCS Only
Front Wheel Sensors
Front-wheel sensors
The front left wheel sensor sends a wheel-speed signal to pin 7 on the control module. The sensor is grounded via pin 6.
The front right wheel sensor sends a wheel-speed signal to pin 5 on the control module. The sensor is grounded via pin 3.
Mounted on the right-hand and left-hand outboard drive shaft CV joints is a toothed wheel with 29 teeth. A sensor of inductive type is mounted on
each steering swivel member. The gap between sensor and toothed wheel must be 0.3-1.3 mm and is not adjustable.