9-5 Linear (9600) L4-2.3L Turbo (2.3t) (2004)
Transmission Position Switch/Sensor: Adjustments
Adjusting The Gear Selector Position Sensor
Checking And Adjusting
1. Remove the battery cover and the battery.
2. Remove the MAXI fuse board and place it to one side. Remove the battery tray.
3. Clean round the fluid filler pipe where it enters the transmission.
4. Remove the fluid filler pipe's nut and remove the pipe.
5. Move the selector lever to position L and undo the nut on the lever.
6. Remove the lever.
7. Engage neutral, fit Adjustment tool, gear selector position sensor 87 92 467.